BRAND NEW 6000 MM GEO SYNTHETIC CLAY LINER COMPOSITE PRODUCTION LINE
Description
New Brand Avaliable from cancelled orders china:
6000 mm GEO SYNTHETIC CLAY LINER Composite Production Line
Working width: 6200 mm
Gsm of products: 4000-9000g/m2
Line speed: 1-5m/min
Unwinder machines :
1) Including 2 sets of unwinder: one set is used for non-woven fabric , another set is used for woven
fabric.
2) Winding roller made from seamless steel tube Φ299×8
3) Line speed:1-6m/min
4) Equipped with spray unit for lateral or diagonal spray on fabrics
5) Made static balancing calibration of rollers, roller covered with rough rubber.
6) Active unwinding, variable speed by frequency conversion control.
7) With one take-up shaf
8) Power: 4w
Accumulator: Three roller accumulator for woven fabric
1) Through the self-weight action of the counterweight, the tension of the fabric surface can be
adjusted.
2) Accumulator: 5m
3) Working width: 6200mm
4) The roller body is made of φ219 seamless steel pipe. The guide roller can rotate flexibly, and the
weight of the balance block is easy to adjust
- Material feeding and Horizontal Spreader x2 sets:
The bucket type or single-pipe screw conveyor is used to lift the feeding mechanism, and the raw materials
are conveyed to the horizontal screw spreader; the gap between the sprinkling openings can be adjusted
through the adjustable air cylinder, and the amount and uniformity of the materials are controlled; after the
raw materials are spread on the woven cloth, the The scraper is smoothed and enters the next machine.
1) Working width: 6200mm
2) Total power: 13kw, Feeding material motor 7.5kw, Spreader motor 5.5kw.
3) The feeding adopts pallet type conveyor belt structure. The conveying speed is adjusted and
controlled by the frequency converter.
4) There is a transition funnel in front of the feeding port of the horizontal screw conveyor, and an
observation window is provided to prevent dust pollution.
5) The horizontal screw conveyor continuously feeds the material horizontally and horizontally, and
the conveying speed is adjusted and controlled by the frequency converter.
6) The dusting port made of two steel plates, etc., can adjust the gap of the dusting port through an
adjustable cylinder to control the dusting amount and uniformity
7) The work platform made of high-quality plates to be welded and processed by planer machining,
welding stress is eliminated by tempering treatment .Panel thickness is not less than 20 mm with
smooth surface, so as to largely reduce friction force on running.
8) Adjustable scraper installed on the platform, thickness of delivered material is adjusted by manual
operation via worm gear wheel lifting gear assistance, so as to achieve the required thickness and
surface roughness of materials.
9) Beam of scraper made of 200 x 100 x 5 rectangular square tube, scrapper made from 10mmA3
steel, with scale indication on beam for lifting calibration .
10) There are fine-tuning device under the work platform to set its level to be consistent with the top
height of feeding roller of needle loom.
- Heavy Structure Needle punching machine :
1) Working width: 6200mm
2) Needle density: 3000n/m, computerized random distribution
3) Stroke: 60mm
4) Frequency: ≤500rpm idling
5) Framework treated by stress relief annealing treatment, reinforced structure
6) The needle board is made from aluminium magnesium alloy, surface electroplated, main needle
beam is
aluminium alloy, air pressure locker fixing plate for easy changing.
7) The bed plate and stripper plate is lifted by motor with 8 groups of worm gears
8) Installed power: ~35.0kw, inverter controlled
9) Output roller forced with air cylinder, cylinder Φ 155mm diameter, with knurling surface on rollers.
Upper feeding roller is Φ 155 mm roller body as a transition roller. Making static balance
adjustment of each rollers to ensure the uniformity of output speed.
10) Auto up ceiling positioned stop function, digital needle depth displayer
11) Strong magnet bar fitted by output side to remove broken needles
- Slitting and Winding Machine
1) Length of winding roller: 6200mm, surface winding
2) Diameter of the roller: 400mm, 10mm wall thickness
3) Surface winding work with pneumatic pressing roller
4) Installed power: 5.5kw, variable speed inverter controlled
5) 7 slitting knives, including 4 pneumatic hard cutters and 3 middle electric cutters
6) Electronic counter with functionalities of timer, fixed-length setting, reset, ringing, digital display.