Description

BRAND NEW CHINESE 4000 MM GEOMEMBRANE PRODUCTION LINE (SINGLE-LAYER)

Material mixer → Extrusion → Calender → Composite with non-woven (single side) → Cooling down & Edge-cutting → Metering→ Winder

Model: GM4000

Product maximum width 4000 mm

Product thickness 0.2‾3 mm

Output: 200-450 kg/hr

Voltage: 380V, 50/60 HZ, 3 phases

2. Specification:

2.1 EXTRUDER Φ 150 MM, 1SET

Material 38CrMoAlA high quality alloy steel, and after nitriding

Screw nitriding depth 0.3～0.6mm

Nitriding hardness HV740～940

Barrel nitriding depth 0.4～0.7mm

Nitriding hardness HV940～1100, Spray double alloy material

2.2 GEARBOX (ITALIAN TECHNOLOGY) 1 SET

Material Hardened helical gear teeth grinding

Gear Carburizing and tooth grinding process using 20CrMoTi

Distribution box material 38CrMoALA nitriding tooth grinding

Power unit by frequency conversion motor, power is 160KW

Control unit Siemens brand AC drive 

2.3 Hydraulic screen changer 1 set

2.4 MOLD FORM HANGER SHAPE MOLD

Mold material 5CrNiMo quality alloy steel forgings,

inner flow channel chrome plated and polished.

Mold structure Absorb imported technology,

internal mold cavity hard chrome plating polished to a bright mirror

2.5 DIE LIP ADJUSTMENT METHOD HAS ADJUSTABLE BOLT, CAN MANUALLY ADJUST THE WIDTH OF THE BEZEL

Heating method Stainless steel electric heating rods heated

Lip width 4300mm

Products maximum width 4000mm

Product thickness 0.2～3mm

2.6 THREE-ROLLER CALENDER 1 SET

Type Three-roll to upright, lower roll axis intersect.

Calender rolls

Diameter Φ550mm

Width 4300mm

Material Quality seamless steel pipe

Structure Used to strengthen the structure of the internal roller,

the roller surface after quenching,

Surface hardness HRC45‾50,

hard chrome plated and polished,

Sided polished chrome layer is 0.10‾0.15mm,

the surface roughness of 0.025μm,

Roll mill under high unilateral 0.05mm

Chassis Welded steel and tempered

Bearing Overall forged material

Drive unit Independent reducer

Control unit Frequency Control

Roller pitch mechanism Electromechanical

When the roller compacted, can adjust the gap

The use of worm, the worm, screw structure, coarse motor drive, manual

fine tuning,

Ends can be individually adjusted to regulate the range of 0 ‾ 80mm.

2.7 COOLING CONVEYOR BRIDGE 1 SET

Bracket length 6m

Pipe specifications Φ102×4300mm, Hard chrome plated

2.8 TRIMMING UNIT 1 SET

Cutting method Using blades

2.9 RUBBER ROLLER TRACTOR 1 SET

Traction form Active Friction

Rubber roller specification Φ350mm×4300mm

Clamping Pneumatic clamping (which is under the roll drive roller,

made of steel rolls, the roll is a rubber roller)

Drive motor AC motor 1.5KW

Reducer Cycloid reducer, gear.

Control unit Siemens brand frequency inverter.

Tractor with a three-roll can be adjusted individually or synchronously adjusted.

2.10 COMPTROLLER GENERAL INSTRUMENT 1 SET

Auto-counting

2.11 AUXILIARY TRACTION TRANSVERSE CUTTING MACHINE 1 SET

Control unit PLC control, signal source for the Comptroller General Instrument

Pressing method Pressed by cylinder

Cutting method Using a rotary disc blade

Lateral movement of the knife Using 1.5KW AC motor drive

Auxiliary traction Φ250 diameter rubber roller..

2.12 SINGLE-POSITION FRICTION WINDER 1SET

Power unit AC motor reducer drive

Winding type Rolling friction, width 4300mm

Winding roller specification Using two Φ370 × 4300mm friction roller