EVA/POE/EVA SOLAR FILM EXTRUSION PLANT
Description
BRAND NEW FROM CANCELLED ORDERS AVALIBALE FOR IMMEDIATE BOOKING:
EVA/POE/EVA Solar Film Extrusion Plant
Machine Main specification
Extruder 2 x 180/35
Capacity: 2 x 350-550kg/h
Maximal film width – 2 x1310 mm
Film thickness range -0.2-1.0 mm
Gsm : 520 at 0.6mm, thickness tolerance: ±2.5%
Shrinkage rate -2-3%, 120 degree, 3 minutes
Die effective width -2900 mm
Roller effective width -3000 mm
Machine design speed -18 m/min(max), normal running speed 8-14m/min ..
Installation power -1068 kw
Cooling water requirement -
Less than 20℃ for Rubber roller
Less than 30℃ for Steel roller
Factory Height -Mixer area height 10.5m, extrusion line area height 8m ,Factory width -Single line no less than 5m
Suitable material - EVA VA >28% EVA compound specially used for solar film VA %>28% EVA MFI 15-25; POE MFI 7-15
Utility requirement -Chiller 50Tr 1 set (15 degree) and 25Tr 1 set (-20 degree)
Compressor 7.5kw
Installation power: 1068kw
Power supply All cable from main cabinet and control cabinet to machine are provided by seller, power supply to main cabinet is provided by buyer
Power input: 480V/3P/60HZ
Power voltage fluctuation: ≤±15%
Frequency: 60HZ
Frequency fluctuation: ±2HZ
Cooling water supply - Should be clean water either in Open or close loop
Maximal water temperature: 30℃
Water pressure: 4-6bar
Pressure fluctuation: ±0.5bar
Average water return pressure: 1.5bar
Cycled water flowing volume: 35-40m3/h
Compressed air supply
Clear air without oil or dust
Air pressure: ≧5.5bar
Pressure fluctuation: ±1% , 0.9 m3/h