HERBOLD RECYCLING GMBH
Description
Granulators
SML Series Standard Duty
SML 45/100 S4-2 Demo Unit / Operated for Less Than 8 Hours
Cutting chamber: 17.5" x 38.5" (450 x 980 mm)
Rotor diameter: 17.5" (450 mm)
Rotor knives: 4 x 2
Bed knives: 2
Motor: 75 HP (55 kW)
Rated 1,200-1,500 PPH
+
Granulator Type SML 45/60-S4-2
Cutting chamber opening: 17.5" x 23.5" (450 x 600 mm)
Rotor diameter: 17.5" (450 mm)
Rotor length: 23.5" (600 mm)
Rotor knives: 4 x 2
Bed knives: 2 x 2
Motor: 100 HP (75 kW)
+
Granulator Type SML 60/100-SB-F7-3
(example - multiple machines available)
Feed opening: 29.5" x 51" (750 x 1300 mm)
Rotor diameter: 23.5" (600 mm)
Rotor length: 51" (1300 mm)
Rotor knives: 7 x 2
Bed knives: 2
Motor: 147 HP (110 kW)
+
Granulator Type SML 60/145-SX-5-2
Feed opening: 29.5" x 51" (750 x 1300 mm)
Rotor diameter: 23.5" (600 mm)
Rotor length: 58.5" (1488 mm)
Rotor knives: 5
Bed knives: 2
Motor: 147 HP (110 kW)
+
SMS Series Heavy Duty
SMS 60/100
Feed opening: 28" x 38.5" (720 x 980 mm)
Rotor diameter: 23.5" (600 mm)
Rotor length: 38.5" (980 mm)
Rotor and bed knives: multiple configurations available
Motor: 90 or 110 HP
+
Granulator Type SMS 80/120-HV7-3
Feed opening: 36.5” x 45” (940 x 1154 mm)
Rotor diameter: 31.5” (800 mm)
Rotor length: 45” (1154 mm)
Rotor knives: 7
Stator knives: 3
Motor: 177 HP (132 kW)
+
Granulator Type SMS 80/160-HV7-3
Feed opening: 36.5” x 61” (940 x 1550 mm)
Rotor diameter: 31.5” (800 mm)
Rotor length: 61” (1550 mm)
Rotor knives: 7
Stator knives: 3
Motor: 215 HP (160 kW)
+
Granulator Type SMS 45/60-H5-3
Feed opening: 23.5" x 22.75" (600 x 580 mm)
Rotor diameter: 17.5" (450 mm)
Rotor length: 23.5" (600 mm)
Rotor knives: 5
Bed knives: 3
Motor: 100 HP (75 kW)
+
Wet Grinders
SMS 80/120
Feed opening: 36.5" x 45" (940 x 1154 mm)
Rotor diameter: 31.5" (800 mm)
Rotor knives: 7
Bed knives: 3
Motor: 180 HP (132 kW)
+
SML 60/100 SB-F7-3
Feed opening: 29.5" x 51" (750 x 1300 mm)
Rotor diameter: 23.5" (600 mm)
Rotor length: 51" (1300 mm)
Rotor knives: 7 x 2
Bed knives: 2
Motor: 147 HP (110 kW)
+
Mechanical Dryers
T1015 Mechanical Dryer
Screen basket diameter: approx. 37" (950 mm)
Working length: approx. 55" (1400 mm)
Drive power: 73 HP (55 Kw)
+
T1015 Factory Refurbished Dryer
Screen basket diameter: 37.5" (950 mm)
Working rotor width: 55" (1400 mm)
Drive power: 100 HP (75 kW)
+
T508 Factory Refurbished Mechanical Dryer
Screen basket diameter: approx. 19.5" (500 mm)
Working length: approx. 47" (1200 mm)
Drive power: 29 HP (22 kW)
Rated 800-1,000 PPH rigid plastics
No controls
+
T800 Mechanical Dryer
Rotor diameter: approx. 31.5" (800 mm)
Rotor length: approx. 78.5" (2000 mm)
Screen size diameter: 0.1" (2.5 mm)
Drive power: 40 HP (30 kW)
+
Friction Washers
We have friction washers in stock for the washing and separating of dirt and dirty water from the ground material.
FA 3000
Conveying length: approx. 118" (3000 mm)
Rotor length: approx. 19.5" (500 mm)
Motor: 24 HP (18.5 kW)
RPM: approx. 1000
+
FA 60/300
Conveying length: approx. 118" (3000 mm)
Rotor Diameter: approx. 23.5" (600 mm)
Motor: 49 HP (37 kw)
RPM: approx. 1000
Weight: approx. 3,4 t
+
Sorting and Separating
SSB 180/418 Swim Tank
158" Long x 71" Wide
4 Transport Drums
Heavier (sink) materials are extracted by a scrape converyor below the tank
Swim Tank 3000/1000
Uses the different specific weights of various types of plastics to separate them.
Large capacity 120" x 40" tank
Light (swim) materials are conveyed by 3 transport drums to a discharge conveyor
Heavier (sink) materials are extracted by a scrape converyor below the tank
+
Dual Shaft Shredder
DWS 45/160
Brand New - Prior Generation
Dual Shaft Shredder with two 17.5" rotors
Large 34" x 63" feed opening
Powered by two 61 HP motors
Control system
Spare cutters
+
Agglomeration/Densification
Complete Plastcompactor System
HV 50 Plastcompactor with 175 HP motor
Silo
Secondary granulator
Air system
Control panel
+
Aget Dust Collector System
Model FT40
Demo Unit - Like New
Weather panel
Electrical shaker
No controls